Recent Postings of Broadly Applicable Alternative Test Methods

1 month ago 1

Environmental Protection Agency (EPA).

This notice announces the broadly applicable alternative test method approval decisions that the Environmental Protection Agency (EPA) made under and in support of New Source Performance Standards (NSPS) and the National Emission Standards for Hazardous Air Pollutants (NESHAP) between January 1, 2024, and December 31, 2024.

I. General Information

A. Does this notice apply to me?

This notice will be of interest to entities regulated under 40 Code of Federal Regulations (CFR) parts 59, 60, 61, 63 and 65; State, local, and Tribal agencies; and the EPA Regional offices responsible for implementation and enforcement of regulations under 40 CFR parts 59, 60, 61, 63, and 65.

B. How can I get copies of this information?

You may access copies of the broadly applicable alternative test method approval documents at https://www.epa.gov/​emc/​broadly-applicable-approved-alternative-test-methods.

II. Background

This notice identifies broadly applicable alternative test methods that the EPA approved in 2024 under the NSPS, 40 CFR part 60 and the NESHAP, and 40 CFR part 63 programs. See table 1 of this notice for the summary of these test methods. Source owners and operators may voluntarily use these broadly applicable alternative test methods in lieu of otherwise required test methods or related testing procedures. Use of these broadly applicable alternative test methods are not intended to and should not change the applicable emission standards.

The Administrator has the authority to approve the use of alternative test methods for compliance with requirements under 40 CFR parts 59, 60, 61, 63, and 65. This authority is found in 40 CFR 60.8(b)(3), 61.13(h)(1)(ii), and 63.7(e)(2)(ii). Additional and similar authority can be found in 40 CFR 59.104(f) and 65.158(a)(2). The criteria for approval and procedures for submission and review of broadly applicable alternative test methods are explained in a previous Federal Register notice published at 72 FR 4257 (January 30, 2007) and located at https://www.epa.gov/​emc/​broadly-applicable-approved-alternative-test-methods. As explained in this notice, we will announce approvals for broadly applicable alternative test methods at https://www.epa.gov/​emc/​broadly-applicable-approved-alternative-test-methods as they are issued and publish an annual notice that summarizes approvals for broadly applicable alternative test methods during the preceding year.

As also explained in the January 30, 2007 notice, our approval decisions involve thorough technical reviews of numerous source-specific requests for alternatives and modifications to test methods and procedures. Based on these reviews, we have often found that these modifications or alternatives would be equally valid and appropriate to apply to other sources within a particular class, category, or subcategory. Consequently, we have concluded that where either a method modification or an alternative method is clearly broadly applicable to a class, category, or subcategory of sources, it is both equitable and efficient to simultaneously approve its use for all appropriate sources and situations.

Use of approved alternative test methods is not mandatory but rather permissive. Sources are not required to employ such a method but may choose to do so in appropriate circumstances. As specified in 40 CFR 63.7(f)(5), however, a source owner or operator electing to use an alternative method for 40 CFR part 63 standards must continue to use the alternative method until otherwise authorized. Source owners or operators should, therefore, review the specific broadly applicable alternative method approval decision at https://www.epa.gov/​emc/​broadly-applicable-approved-alternative-test-methods before electing to employ any alternative method. Source owners or operators choosing to use a broadly applicable alternative should also notify their regulatory agency prior to using the alternative.

III. Approved Alternative Test Methods and Modifications to Test Methods

This notice specifies three broadly applicable alternative test methods that the EPA approved between January 1, 2024, and December 31, 2024. The alternative method decision letter/memo designation numbers, test methods affected, sources allowed to use this alternative, and method modifications or alternative methods allowed are summarized in table 1 of this notice. A summary of approval documents was previously made available on our Technology Transfer Network between January 1, 2024, and December 31, 2024. For more detailed information, please refer to the complete copies of these approval documents available at https://www.epa.gov/​emc/​broadly-applicable-approved-alternative-test-methods.

As also explained in our January 30, 2007 notice, we will revisit approvals of alternative test methods in response to written requests or objections indicating that a particular approved alternative test method either should not be broadly applicable or that its use is not appropriate or should be limited in some way. Any objection to a broadly applicable alternative test method, as well as the resolution of that objection, will be announced at https://www.epa.gov/​emc/​broadly-applicable-approved-alternative-test-methods and in a subsequent Federal Register notice. If we decide to retract a broadly applicable ( printed page 22477) test method, we will likely consider the need for an appropriate transition period for users either to request case-by-case approval or to transition to an approved method.

Karen Wesson,

Director, Air Quality Assessment Division.

Table 1—Approved Alternative Test Methods and Modifications to Test Methods Referenced in or Published Under Appendices in 40 CFR Parts 60 and 63 Posted Between January 2024 and December 2024  a

Alternative method decision letter/memo No. As an alternative or modification to . . . For . . . You may . . .
ALT-156 Methods prescribed in § 60.5417b(d)(8), which specifies the use of a calorimeter, gas chromatograph (GC), mass spectrometer (MS), or grab samples at an 8-hour sampling interval Measuring the Combustion Zone Net Heating Value (NHVcz) of industrial steam-assisted flares and Net Heating Value Dilution Parameter (NHVdil) of air assisted flares at a standoff distance as an alternative to the methods prescribed in § 60.5417b(d)(8), which specifies the use of a calorimeter, gas chromatograph (GC), mass spectrometer (MS), or grab samples at an 8-hour sampling interval Measure the Combustion Zone Net Heating Value (NHVcz) of industrial steam-assisted flares and Net Heating Value Dilution Parameter (NHVdil) of air assisted flares at a standoff distance as an alternative to the methods prescribed in § 60.5417b(d)(8).
ALT-157 Determination of Net Heating Value (NHV) from gas sent to an enclosed combustion device or flare subject to 40 CFR Part 60, Subpart OOOOb The JP3 VeraCal optical system, a near-infrared (NIR) optical spectrometer, sample collection system, and a reference cell for ongoing calibration verification Use the VeraCAL instrument for determining NHV in Btu/scf from gas being sent enclosed combustion device or flare subject to 40 CFR Part 60, Subpart OOOOb.
ALT-161 Procedures and instructions for establishing the Maximum Burn Rate (Category 4) in EPA Method 28 and Method 28R Determination of maximum burn rate in Method 28 or Method 28R where an appliance cannot burn fuel at a rate greater than 1.9 kg/hr Use the procedures enumerated (1-4) on page 2 of the Alternate Test Method letter for determination of maximum burn rate for an appliance incapable of burning wood fuel at a rate in excess of 1.9 kg/hr.
a  Source owners or operators should review the specific broadly applicable alternative method approval letter at https://www.epa.gov/​emc/​broadly-applicable-approved-alternative-test-methods before electing to employ any alternative test method.
Read Entire Article