Federal Aviation Administration (FAA), DOT.
Notice of proposed rulemaking (NPRM).
The FAA proposes to supersede Airworthiness Directive (AD) 2021-22-12, which applies to certain Honda Aircraft Company LLC (Honda) Model HA-420 airplanes. AD 2021-22-12 requires removing and cleaning the inner diameter of the flap control pushrods and repetitively applying corrosion inhibiting compound (CIC) to this area. Since the FAA issued AD 2021-22-12, new flap control pushrods have been approved that are more corrosion resistant and do not require repetitive CIC applications. This proposed AD would retain all actions of AD 2021-22-12 and would require replacing the flap control pushrods with improved design pushrods for all airplanes affected by AD 2021-22-12, as well as for other airplanes not affected by AD 2021-22-12. The FAA is proposing this AD to address the unsafe condition on these products.
The FAA must receive comments on this proposed AD by May 27, 2025.
You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods:
- Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments.
- Fax: (202) 493-2251.
- Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
- Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.
AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-0485; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, any comments received, and other information. The street address for Docket Operations is listed above.
Material Incorporated by Reference:
- For Honda Aircraft Company material identified in this proposed AD, contact Honda, 6430 Ballinger Road, Greensboro, NC 27410; phone: (336) 662-0246; website:hondajet.com.
- You may view this material at the FAA, FAA, Airworthiness Products Section, Operational Safety Branch, 901 Locust, Kansas City, MO 64106. For information on the availability of this material at the FAA, call (817) 222-5110.